Bosch Rexroth 3842999032. Lift transfer unit HQ 2/U LS
Lift transfer unit HQ 2/U LS
- Lift transverse unit for feeding out of a from longitudinal section into a transverse section and vice versa
- Use in tight spaces by means of suspended drive motor (outside dimensions must be no wider than the section)
- Drive by toothed belt coupling is not possible because of the compact design
- Conveyor medium: Toothed belt (suitable for use in an EPA)
- Pneumatic equipment for 2 (top, center) or 3 (top, center, bottom) lift positions
- Suitable for mounting on an ST 2/… section with a profile width of 45 mm or an ST 2/…-H section with a profile width of 50 mm
- Reversible operation possible
ESD | yes |
Pneumatic straight connection [] [mm] | 6 |
Workpiece pallet total weight [mG] [kg] | 30 |
required compressed air connection [pmin] [bar] | 4 |
Notice | Pneumatic equipment PN = 2: Upper and middle lift position,Pneumatic equipment PN = 3: Upper, middle and lower lift position |
Preferred values [mm] | 160,240,320,400,480 |
Scope of delivery | Incl. fastening material,Pneumatic equipment for two or three positions,Assembly kit for electrical position inquiry,Protective housing |
Delivery information | Fully assembled,Kit for electrical position inquiry included |
required compressed air connection [pmax] [bar] | 6 |
Recommended accessories | Damper DA 2/60 for the outfeeding of workpiece pallets at vN gt 9 m/min,Rocker WI 2/, WI/M and dampers DA 2/60, DA 2/100-C for BG 2 for the infeeding of workpiece pallets |
Required accessories | 1x M12x1 sensor with rated sensing range S for each position inquiryN = 4 mm |
Weight [kg] | 0 |
| Manufacturer Nr. | 3842999032 |
|---|---|
| Manufacturer | Bosch Rexroth |
| Weight | 0.100000 |