ELT TRANSVERSE CONVEYOR EQ 2/TE LS
- Pre-assembled module for branching off into a transverse section in which the second end does not lead to a further transverse section (dead end)
- Size 2 from ≥ 480 x 480 mm onwards with two lifting cylinders per lift transverse unit
- Conveyor medium: Toothed belt (suitable for use in an EPA)
- Pneumatic equipment for 2 (top, center) or 3 (top, center, bottom) lift positions
- Suitable for mounting on an ST 2/… section with a profile width of 45 mm or an ST 2/…-H section with a profile width of 50 mm
- Reversible operation possible
- Accumulation operation not permitted on the lift transverse units
ESD | yes |
Length max [L max] [mm] | 6000 |
Length min [L min] [mm] | 240 |
Preferred values [mm] | 160,240,320,400,480,640,800 |
Pneumatic straight connection [] [mm] | 6 |
Workpiece pallet total weight [mG] [kg] | 30 |
required compressed air connection [pmax] [bar] | 6 |
required compressed air connection [pmin] [bar] | 4 |
Section load in accumulation operation [kg] | 60 |
Scope of delivery | 1x lift transverse unit HQ 2/O,1x Belt section BS 2/TE,1x connection kit,1x housing elements SK 2/B,Pneumatic equipment for two or three positions,Assembly kit for electrical position inquiry |
Delivery information | Lift transverse unit HQ 2/O, assembled,Belt section BS 2/TE, assembled,Protective housing, not assembled,Protective housing, not assembled |
Recommended accessories | Damper DA 2/60 for the outfeeding of workpiece pallets WT 2, WT 2/F, WT 2/H or WT 2/F-H at vN gt 9 m/min,Rocker WI 2/, WI/M and dampers DA 2/60, DA 2/100-C for BG 2 for the infeeding of workpiece pallets |
Required accessories | 1x M12x1 sensor with rated sensing range S for each top/bottom position inquiryN = 4 mm |
Weight [kg] | 0 |
Manufacturer Nr. | 3842999039 |
---|---|
Manufacturer | Bosch Rexroth |
Weight | 0.100000 |