HD 2/H Size 1 Lift Rotate Unit for Workpiece Pallets 240-400 mm - Bosch Rexroth 3842998760

The HD 2/H Size 1 lift rotate unit raises workpiece pallets approximately 50 mm above the conveyor level and rotates them precisely by 90° or 180°. For Size 1 and Size 2 units, the reverse rotation takes place below the belt and runs in parallel with the workpiece pallet change, significantly reducing cycle times. A center position is available in the 90° version. The unit is supplied fully assembled, including two dampers for the end positions of the rotary movement and all fastening material for mounting on conveyor sections.

• 90° or 180° rotation for square workpiece pallets; 180° rotation for non-square workpiece pallets
• Reverse rotation below the belt - parallel to pallet change for shorter cycle times
• Center position available (Size 1 and Size 2 in 90° version only)
• Maximum workpiece pallet total weight: 240 kg
• Fully assembled on delivery, including dampers and fastening material
• ESD-compatible

Required accessories

• Protective housings
• Cylinder switch (Art. no. 0830100433) for top/center/bottom lift positions
• Sensor for rotary movement at 0°/180° or 0°/90°

Recommended accessories

• VE 2 or VE 2/D stop gate for damped stopping of a workpiece pallet