Bosch Rexroth 3842999002. HQ 2/C-H Lift Transverse Unit
HQ 2/C-H Lift Transverse Unit
- This Item: €4,817.79Excl. 19% VAT , excl. Shipping Cost
- Bosch Rexroth 3842345111. Housing element SK 2, 240x320 €219.27Excl. 19% VAT , excl. Shipping Cost
- Bosch Rexroth 3842338767. Housing element SK 2/B, 320x400 €178.98Excl. 19% VAT , excl. Shipping Cost
HQ 2/C-H Lift Transverse Unit
- Lift transverse unit for feeding out of a from longitudinal section into a transverse section and vice versa
- Use for high total weights up to 2 kg/cm on the smallest side of the Workpiece pallet and up to 240 kg
- Flat construction permits system layouts on several levels
- Synchronized lifting movement of the four block cylinders for uniform and parallel lifting movement
- Conveyor Medium Flat Top Chain
- Suitable for mounting on an ST 2/… section with a profile width of 45 mm or an ST 2/…-H section with a profile width of 50 mm
- Can be combined with WT 2, WT 2/F, WT 2/H and WT 2/F-H
- Depending on the installation, height-adjustable lateral guides can be used as a fixed stop for exporting or as a lateral guide when changing workpiece pallets
- Fixed stops in the form of adjustable/movable lateral guides made of strip steel
- Reversible operation possible
- Accumulation operation not permitted
ESD | yes |
Workpiece pallet total weight [mG] [kg] | 240 |
Pneumatic straight connection [] [mm] | 8 |
Track width in the longitudinal conveyor min [bL min] [mm] | 640 |
Notice | Individual width variants available for track width in longitudinal conveyor,Individual width variants available for track width in transverse conveyor |
Preferred values [mm] | 480,640,800,1040,1200 |
Scope of delivery | Incl. fastening material,Switch holder for 12 mm sensor for position inquiry,Assembly kit for electrical position inquiry,Lateral guide kit for bl 640 mm or for bl gt 640 mm |
Delivery information | Fully assembled,Kits for lateral guides included |
required compressed air connection [pmax] [bar] | 6 |
required compressed air connection [pmin] [bar] | 4 |
Track width in the transverse conveyor min [bQ min] [mm] | 480 |
Track width in the transverse conveyor max [bQ max] [mm] | 1200 |
Track width in the longitudinal conveyor [bL max] [mm] | 1200 |
Required accessories | M12x1 sensor for position inquiry,Dampers for outfeeding and infeeding workpiece pallets |
Recommended accessories | Dampers DA 2/100-E, DA 2/150-E or a fixed stop included in the scope of delivery can be used for outfeeding the WT 2, WT 2/F, WT 2/H and 2/F-H workpiece pallets. Damper DA 2/100-C can be used at the belt end for outfeeding a WT 2 or WT 2/F workpie |
Weight [kg] | 0 |
| Execution | TEC |
|---|---|
| Manufacturer Nr. | 3842999002 |
| Manufacturer | Bosch Rexroth |
| Country of Manufacture | Germany |
| Weight | 0.009900 |
| HS-Code | 84313900 |
