Images are examples, some edited with AI. The technical data are authoritative. AI notice
EQ 2/TE Electrical Transverse Conveyor, ESD-rated - Bosch Rexroth 3842999896
The EQ 2/TE electrical transverse conveyor is a pre-assembled module that branches workpiece pallets from a longitudinal conveyor into a dead-end transverse section. The toothed-belt drive is rated for use in EPA environments and reversible operation is standard. The module mounts on ST 2/... sections (45 mm profile width) or ST 2/...-H sections (50 mm) and is compatible with WT 2, WT 2/E and WT 2/F workpiece pallets.
- Specialist dealer since 2009
- Invoice payment for regular customers
- Worldwide shipping
- Technical questions clarified with the manufacturer
Description
The EQ 2/TE is a pre-assembled branching module for the Bosch Rexroth TS 2plus transfer system. It routes workpiece pallets out of the longitudinal line and into a transverse section whose second end is closed (dead end). The toothed-belt conveyor medium is ESD-safe and cleared for use in an Electrostatic Protected Area (EPA).
- ESD-rated toothed belt drive - suitable for EPA-compliant assembly lines
- Pneumatic lift equipment configurable for 2 positions (top, center) or 3 positions (top, center, bottom)
- Reversible operation supported - increases flexibility for in-feed and out-feed routing
- Accumulation operation is not permitted on the lift transverse units - maximum section load in accumulation mode: 60 kg
- Available in size BG 1 and BG 2 (BG 2 from 480 x 480 mm upwards, with two lifting cylinders per lift transverse unit)
- Rexroth 4EE energy efficiency rating
Technical data
| Parameter | Value |
|---|---|
| Article number | 3842999896 |
| Conveyor medium | Toothed belt (EPA-rated, ESD: yes) |
| Size | BG 1; BG 2 |
| Length l | 240 ... 6,000 mm |
| Track width, transverse bQ | 160; 240; 320; 400; 480; 640; 800 mm |
| Track width, longitudinal bL | 160; 240; 320; 400; 480 mm |
| Nominal speed vN | 0; 6; 9; 12; 15; 18 m/min |
| Max. workpiece pallet total weight mG | 30 kg |
| Max. section load in accumulation mode | 60 kg |
| Required compressed air connection p | 4 ... 6 bar |
| Pneumatic push-in connection | 6 mm |
| Pneumatic equipment PN | 2 (top, center) or 3 (top, center, bottom) |
| Motor connection AT | S (cable/connector) or K (terminal box) |
| Motor mounting MA | R (right), M (center), L (left) |
| Mounting position AO | 0; 1; 2 |
| Compatible workpiece pallets | WT 2/E, WT 2, WT 2/F |
| Compatible sections | ST 2/... (45 mm), ST 2/...-H (50 mm) |
| Scope of delivery | 1x lift transverse unit HQ 2/O (assembled), 1x belt section BS 2/TE (assembled), 1x connection kit, 1x housing elements SK 2/B (not assembled), pneumatic equipment, assembly kit for position sensing |
| Weight | approx. 0.01 kg (ordering unit; system weight depends on configuration) |
| Manufacturer | Bosch Rexroth |
| Hersteller-Nr | 3842999896 |
| Zolltarifnummer | 84313900 |
| GPSR manufacturer information | Bosch Rexroth AG, Zum Eisengießer 1, DE-97816 Lohr am Main, www.boschrexroth.com |
| Condition of article | New |
| Article authenticity | Original product |
| Country of Manufacture | Germany |
| ESD version | TEC |
Downloads
Questions about this item
Any other question?
Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day.