Basic mechanic elements
Bosch Rexroth assembly technology
The Bosch Rexroth basic mechanic elements cover the parts for building frames and workstations: strut profiles (for example 30x30 slot 8 or 20x40 in anodised aluminium), base plates, grooved plates, connectors such as the 50x50 slot 10 T-connector, linear guides, feet and rollers (EcoFlow, Fmax 150 N) and tools. The profiles use slot systems 8 and 10; many elements are ESD-suitable, such as the 40x40L M12 strut profile or the D29 stainless steel base plate. Zinc die-cast, aluminium and stainless steel variants cover different loads and environments.
Linear guidesThe Bosch Rexroth linear guides in this category build on the toothed-belt LF systems.
Air-supply elementsThe Bosch Rexroth air-supply elements route compressed air directly inside the 45x45 profile system (slot 10).
Installation elementsBosch Rexroth installation elements route cables and lines along the aluminium profile system.
ToolsBosch Rexroth tools support the machining and assembly of the aluminium profile system.
Feet and wheelsBosch Rexroth feet and wheels set frames from the aluminium profile system on a firm footing or make them mobile.
Connection elementsBosch Rexroth connection elements form the load-bearing joints between strut profiles.
Mounting of surface elementsFor mounting surface elements, Bosch Rexroth groups the parts used to fit panels, glazing and infills into the profile frame.
Elements for manual movementBosch Rexroth elements for manual movement guide workpieces and containers by hand over roller and slide tracks.
Doors and fittingsBosch Rexroth doors and fittings give access to enclosures and guard fences built from the profile system.
ESD ComponentsBosch Rexroth ESD components provide grounding and equipotential bonding on profile frames.
Protective devices EcoSafeThe Bosch Rexroth EcoSafe line groups protective devices and partition walls for guard fences and machine enclosures.
JointsBosch Rexroth joints connect profiles so they can pivot, allowing angle-adjustable structures.
Profiles and workpiece palletsThe Miscellaneous category groups supplementary parts of the Bosch Rexroth mechanical base elements that do not fit a single...
Strut profilesThe Bosch Rexroth profiles cover the strut profile system in slots 6 (R20), 8 (R30) and 10 (R40, R45, R50, R60) plus...
Typical applications: building machine frames, guarding enclosures, workstations and fixtures in special-purpose machinery. Selection is by profile cross section and slot system (8 or 10), material (anodised aluminium, zinc die-cast, stainless steel) and ESD requirement. The subcategories let you pick profiles, connection elements, feet, wheels and tools as needed.
![Frame Profile 30x30 WG30 2x[M8+7.8], Anodized Aluminum - Bosch Rexroth 3842992977](https://boxic24.com/media/catalog/product/d/c/dc_ecommerce_big_jpg_7729.jpg?width=240&height=300&store=english&image-type=small_image)
