LED surface-mounted luminaire LINURA.edge LEA 2100/850/ST, 21 W, 2205 lm, 1035 mm, through-wired - Waldmann 114044000-00801380

For workbenches, assembly lines and machine gantries around one metre wide, the LINURA.edge LEA 2100/850/ST provides approx. 2205 lm of neutral white light at 5000 K along its 1035 mm length, with a power consumption of approx. 21 W. As the through-wired ST version, it feeds further luminaires in the same line, so several light points share a single supply cable from the control cabinet.

Benefits

• Simple on/off control via an external switch, no dimming logic required in the machine control
• Approx. 105 lm/W at 21 W, delivering 2205 lm of direct light
• Through-wired: further luminaires connect to the luminaire itself, saving cable runs and terminals
• IP54 and protection class III: protected against dust and splashing water, powered by 22-26 V DC safety extra-low voltage
• 20-year Waldmann manufacturer's warranty, including LED light source and driver (Waldmann general warranty terms, purchase in the EEA)

Applications

• Workbenches about 1 m wide
• Assembly lines in series production
• Machine gantries and protective housings

Installation and accessories

• Supplied brackets, adjustable by +/- 60°, for aluminium system and control cabinet profiles
• Mains connection via integrated M12 plug connector, A-coded, 5-pin, for 22-26 V DC
• Accessories: M12 connection cables 3 m and 7 m, M12 sockets and plugs, screw-on or magnetic brackets, LDS/ST distance sensor, capacitive contact sensor